home *** CD-ROM | disk | FTP | other *** search
- Path: news.primenet.com!not-for-mail
- From: sterger@primenet.com (Alan Sterger)
- Newsgroups: comp.dcom.modems
- Subject: Beware: USRSDL.EXE on USR's FTP site from 1994!
- Date: 26 Feb 1996 22:00:02 -0700
- Organization: Primenet Services for the Internet
- Sender: root@primenet.com
- Message-ID: <4gu34i$bqh@nnrp1.news.primenet.com>
- X-Posted-By: ip142.lax.primenet.com
- X-Newsreader: WinVN 0.99.7
- MIME-Version: 1.0
- Content-Type: Text/Plain; charset=US-ASCII
-
- USR has put an old SDL file on their FTP site. The text below is from the
- 12-2-94 readme. USR what gives?
-
- ****************************** USRSDL.exe Readme.1st ************************
-
- Note: Before you install this upgrade to V.34, please consult the section of
- your manual that explains how to use an SDL file.
-
- You will also notice a new file in this archive, USR.CFG. This is used
- to send initial commands to the modem when SDL'ing. Note the basic
- setup we have implemented. This is to turn off V8-CI, and should be
- left in, but you may add additional commands should you so desire.
-
- This is the third production maintenance release of V.34:
- DSP Date:12-2-94
- SV Date :12-2-94
-
- ********************************* End included file **************************
-
- Regards,
- --
- Alan Sterger | sterger@primenet.com
- |
-
-